Recently I installed a CanBus Switchback Led light for the front blinkers, so that while the parking lights are on in the front they act as headlights, and when the blinker is used they turn amber and use the relay to blink. This modification did require the use of large resistors to makup for the leds to blink properly. Whist installing them I lost power to the passenger side of the parking light only (checking with a multi-meter). The blinker portion worked just fine, and the drivers side too. I noticed later that my rear licence plate lights have also lost power as well as the passenger side parking brake light. I have looked and replaced fuses #81 #51
but still no result.
Any ideas or notifications would be extremely appreciated!